Saab 9-5

Since 1997 of release

Repair and car operation



Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- The power supply system and release of the fulfilled gases
   The general data and security measures
   Sbrasyvanie pressure in fuel system
   + The power supply system of petrol engines
   - The power supply system of diesel engine V6
      The general information
      Removal and installation of a sleeve of an air inlet, the case of the air filter and gauge MAF
      Removal and installation of the inlet pipeline
      Replacement of the gauge of position of a pedal of gas
      Replacement of gauges of a turbo-supercharging and the gauge of temperature of fuel
      Replacement of the valve of management with pressure of pressurisation
      Removal and installation турбокомпрессора
      Removal and installation интеркулера
      Removal and installation of a fuel tank
      Replacement of the fuel filter
      Removal and installation of a fuel distributive highway
      Removal and installation of the gauge of a stock of fuel
      Removal and installation ТНВД and replacement of its epiploon
      Removal and installation of atomizers
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Removal and installation of a fuel tank

 PERFORMANCE ORDER

    Tyre out the car on the lift, empty a fuel tank and lift the car. Remove back wheels.
    Turn out the plastic screw of fastening of a tube of a jellied mouth of a fuel tank (5 on an illustration).
    By means of the special adaptation separate a ventilation hose (6 on an illustration). Remove a jellied tube from unions of a jellied mouth (7 on an illustration) and take her aside.
    Remove an exhaust pipe for каталитическим the converter.
    Disconnect both cables of a drive of a lay brake from the lever.
    Disconnect from the holder of the fuel filter following fuel lines: a hose of the pump of an additional heater, 2 returnable hoses and a submitting hose.
    Place under a fuel tank a jack, turn out forward bolts of fastening of collars of a fuel tank and lower a forward part of a tank.
    Separate a socket on the top part of a fuel tank and completely remove it from the car.
    Installation is made upside-down.