Saab 9-5

Since 1997 of release

Repair and car operation


Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- The power supply system and release of the fulfilled gases
   The general data and security measures
   Sbrasyvanie pressure in fuel system
   + The power supply system of petrol engines
   + The power supply system of diesel engine V6
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Рамки для планов эвакуации 600􊼘 купить

The power supply system and release of the fulfilled gases

Specifications

Power supply system type
Petrol engines Direct injection (distributed, consecutive), under control of ECM, with a turbo-supercharging and интеркулером
The diesel engine Direct injection with a distributive highway (Common rail) and electronic control with a turbo-supercharging and интеркулером
Axial люфт a shaft турбокомпрессора, mm 0.036 0.091

Petrol engines

Dependence of target pressure of the gauge of pressure of system EVAP on pressure


Supported pressure in the power supply system, атм
3.0 0.1
Pressure in the power supply system in 20 minutes after engine deenergizing, атм
Not less than 2.3
Resistance of the gauge of a stock of fuel at empty//a full tank, the Ohm
    Petrol engines
50 1.5//425 6.5
    Diesel engine V6
60 2.6//390 6.0
Productivity of the fuel pump at 3.0 атм, l/mines
Not less than 1.4
Volume of the fuel filter, l
0.6
Type of injectors
Bosch EV6 E, with 4 nozzles
    4-cylinder engines
Brown colour
    Engines V6
Dark blue colour
Resistance of an injector, Ohm
15.95 0.4
Fuel stream through injectors 4//6-cylinder engines, ml/30 with
176 7//109 4
Admissible difference of streams of fuel through injectors 4//6-cylinder engines, ml
14//8
Pump SAI type
Borg Warner 800-T2
Productivity of pump SAI, kg/ch
Not less than 30 at pressure всасывания 0.1 атм
The current consumed by pump SAI at work//start-up, And, no more
30//120
Pressure of pressurisation турбокомпрессора, атм 0.03 атм
    Compressor Garret GT17
0.40
    Compressor Mitsubishi TD04HL-15T
0.45
Type of ljambda-probes of 4-cylinder engines
Bosch LSF 4.7 with electroheating
Capacity of a heater of a ljambda-probe of 4-cylinder engines, Vt
7
Control range of pressure of a ljambda-probe of 4-cylinder engines, In
0 1
Resistance of a heater of a ljambda-probe, Ohm
9
Resistance of the valve of a purge of adsorber EVAP, Ohm
45 5
Resistance контрольно the valve of the closed tank (EVAP), the Ohm
24.5 1.5
Dependence of target pressure of the gauge of pressure EVAP on pressure
Pressure, кПа
Pressure, In
    -3.75
0.5
    0
3.5
    1.25
4.5

Diesel engines

Dependence of target pressure of gauge MAF on air stream
Air stream of kg/ch
Pressure, In
    100
2.27
    200
2.77
    300
3.16
    400
3.42
    500
3.66
    600
3.86
    700
4.04
    800
4.20
    900
4.36
    1000
4.49
Resistance of the gauge of a stock of fuel at empty//a full tank, the Ohm
60 2.6//390 6.0
The maximum pressure of fuel ТНВД, атм
1000
Soaking up pressure ТНВД,